(image for) Find FlameMasks On Facebook!!

Trad StringFlame

  • Model: TradStringFlame
  • 983 Units in Stock

Starting at: $14.00

Please Choose:

* One time charges may apply
Add to Cart:

  A design recently pulled from the archive, Trad. StringFlame #1 was formerly called "single lick". These flames are great used by themselves, or combined with any other traditional flame design I offer for a look all your own!!! Multiple sets may be placed next to each other or a single line can be used to separate two tone colors/body lines.

There are FOUR different versions designs included. 8, 4, and 2 flame segments. One of the longer strings is pre-curved (S curve) to help going over rounded bodies such as 40 Model Ford. There are two different sizes of each segment variation.
These different designs are indicated by a "SOLID" color in the low resolution example image at top of this page.BEEST CUSTOMS Killer 62 Chevy using StringFlames and Trad. #5 FlameMasks!

There are a WHOPPING 70 MASKS included per sheet!!
Sizes range from approximately 1/8" wide x 1" long to 0.175" wide x 4.5" long

Sheet includes various sizes to fit a WIDE range of different castings from large 1/64 scale casts like VW Drag Bus and Dairy Delivery and also masks included that will work nicely on smaller casts such as Nova and Camaro.
Several masks may be applied along side each other to create long, continuous, flames much like the 62 Chevy Truck example shown here, done by Beest Customs.

In general, I RECOMMEND New users get the "Inner ONLY" masks WITH FILM!!
The inner masks are generally much easier to use AND also make REPEAT usage Much more likely.
The "with Film" versions can make transferring the masks to surface easier for less experienced users.
However, using the "NO Film" version (manually application) of this design, is not incredibly difficult, and in fact some users may find manual manipulation of these masks easier when applying to rounded body lines or surfaces. Those that have used masks previously, may
especially prefer this method. Even the straight line Inner masks can be "curved" if manually applied. When using manually however, PARTICULAR ATTENTION must be given to the tips of flame licks to insure proper placement/alignment and orientation.

I STRONGLY Suggest for users that prefer the "outer" masks, choose "outer ~ WITH Film" in order to avoid complications while transferring to the surface.

these designs are available in the following application styles:
Inner ONLY WITH Film
Outer ONLY WITH Film
Inner & Outer NO FILM

Please choose "application style" from the drop down menu below.
Note: "Default" option is Inner + Outer ~ NO FILM

Other than those stipulations, I recommend these masks for all skill levels.

Remember, the easy way to choose the masks you need are ....
INNER Masks should be used if you want to paint the FLAME COLOR FIRST, apply the mask, then paint the Main body color and remove mask.
OUTER MASKS should be used if you want to paint the Main Body color FIRST, apply the mask, then spray the FLAME COLOR LAST.

These masks can be reused several times if you are careful not to rip or stretch them during removal and store them correctly.


(image for) True Fire/RF Stencils

Have you seen ...

(image for) 1/64th scale True Fire/Real flame stencils

Who's Online

There currently are 37 guests online.
Your IP Address is:
Copyright © 2023 FlameMasks Store. Powered by Zen Cart