FlameSTRIPES #1

larger image

Model: FlameStripes#1
984 Units in Stock

Starting at: $13.00

Please Choose:

Application STYLE

FILM TYPE

* One time charges may apply

Quantity Discounts Available

Add to Cart:

KB Kustoms 69 Dodge Charger done with FlameStripe masks.

These masks are designed specifically for easy Special Effects such as "Two Tone" where two colors are seperated by a distinct line.
However, with these masks, the seperation "line", is also a COOL "Flame" design!! They can also be used as actual "stripes" as one side of the masks is a STRAIGHT edge while the other is the flame pattern.

In addition, there are matching "single" stripes with flames on both sides, which work GREAT for a single, but wide, FlameSTRIPE down the center of hood, roof, and even the rear deck! In most cases, this can be accomplished with ONE single mask that runs from hood to rear deck!!

There are 36 masks per sheet.
TWO different Traditional Flame designs with matching "center" and "side" sets.
Approximate sizes range from 1 7/8" long x 1/4" wide to 4 1/4" long x 7/8" wide

These are especially designed for 1/64 scale applications, but may work on different scales as well, depending on the effect desired.

This particular design is available as
Inner AND Outer WITHOUT Film
Or
WITH Film in either inner or outer styles.

I recommend the "NO Film" masks primarily for more advanced skill levels, however, new users may also achieve great results with minimal difficulty of application.
These masks have very good reuse capabilities if proper care is used during application, removal, and storage.

Remember, the easy way to choose the masks you need are .... INNER Masks should be used if you want to paint the FLAME COLOR FIRST, apply the mask, then paint the Main body color and remove mask.
OUTER MASKS should be used if you want to paint the Main Body color FIRST, apply the mask, then spray the FLAME COLOR LAST.