FlameStripes #3 masks are similar to the first release but offer a fresh look and MORE variation and versatility. There are 6 different NEW styles on the standard sheet! They are designed specifically for easy Special Effects such as "Two Tone" where two colors are separated by a distinct line of COOL "Flames"!! They can also be used as actual "stripes" as one side of the masks is a STRAIGHT edge while the other is the flame pattern.
NEW and EXCLUSIVE FlameStripe #3 sheet designs have something for everyone! Some specifically designed for use on larger castings such as VW Drag Bus and some for smaller castings like 67 Camaro. Plus some longer for castings like 55 Chevy Panel. Use the inner or outer sides of masks. Many effects are possible within your masked area, whether it be Real Flame/tru fire, marbleize, multiple color fades, or just a nice single color...the choice is yours, experiment, have fun!!
There are 48 masks per sheet.
SIX different Traditional Flame designs/sizes total, four pairs of each.
All have nicely rounded ends for smooth transitions.
These are especially designed for 1/64 scale applications, but may work on different scales as well, depending on the effect desired.
This particular design is available as
Inner AND Outer WITHOUT Film (default)
Inner ONLY, WITH Film
Outer ONLY, WITH Film
INKED, with FILM Inner and Outer
- Mask Styles & Options Explained -
I recommend the "NO Film" masks primarily for more advanced skill levels, however, new users may also achieve great results with minimal difficulty of application.
These masks have very good reuse capabilities if proper care is used during application, removal, and storage.
Remember, the easy way to choose the masks you need are .... INNER Masks should be used if you want to paint the FLAME COLOR FIRST, apply the mask, then paint the Main body color and remove mask.
OUTER MASKS should be used if you want to paint the Main Body color FIRST, apply the mask, then spray the FLAME COLOR LAST.