There are 36 masks per sheet.
TWO different Traditional Flame designs with matching "center" and "side" sets.
Approximate sizes range from 1 7/8" long x 1/4" wide to 4 1/4" long x 7/8" wide
These are especially designed for 1/64 scale applications, but may work on different scales as well, depending on the effect desired.
This particular design is available as
Inner AND Outer WITHOUT Film
Or
WITH Film in either inner or outer styles.
I recommend the "NO Film" masks primarily for more advanced skill levels, however, new users may also achieve great results with minimal difficulty of application.
These masks have very good reuse capabilities if proper care is used during application, removal, and storage.
Remember, the easy way to choose the masks you need are .... INNER Masks should be used if you want to paint the FLAME COLOR FIRST, apply the mask, then paint the Main body color and remove mask.
OUTER MASKS should be used if you want to paint the Main Body color FIRST, apply the mask, then spray the FLAME COLOR LAST.
|